Gas heater ignition operation steps
1. Connect the outlet end of the pressure reducing valve to the hose and fix it with a buckle, and connect the other end of the pressure reducing valve to the gas tank.
2Open the gas tank valve.
3. Press the black knob on the heater, turn it 90 degrees counterclockwise and release it quickly.
4. While pressing the knob with the right hand, press the red ignition switch with the left hand continuously until the burning head ignites.
5. After lighting the fire, loosen the knob to the right and turn it counterclockwise to make the fire smaller.
6. When turning off the fire: keep the knob in the position with high firepower, press the knob and turn it clockwise to the OFF position.
Precautions for the use of gas heaters
1. The ignition operation must be carried out after the heater is installed.
2. It is forbidden to put the burning head on the face to ignite.
3. If the ignition fails and you smell the liquefied smell, please stop the ignition, and continue the ignition operation after the liquefied gas is emitted from the combustion head.
